It is easy for a sheet metal break machine to seem simple in the way it functions. But, its high level of flexibility and the many models available including the can make it difficult to settle on press brakes that are best for you. There are significant variances in the shape, length, and thickness, all which may require you to place a custom order for your press brakes. But where do you start?
As a supplier of Bailegh sheet metal brakes notes, getting accurate knowledge about what you need can make your selection a lot easier. On that, some of the factors that you need to focus on here are:
You determine this from the complete length of the piece that is due for processing. Your press brake manufacturer can section this and work on your product from different stations. They will assemble the parts and confirm that they add up to the total length that you require. Operating from multiple stations reduces processing time because there is no repetition of tasks. Working from a single station is still possible, but the output would be low in spite of the many hours that it would take to complete your order.
This factor refers to how far the metal press brake can bend. It makes for some of the critical factors to consider when purchasing a new machine. By understanding the tonnage that is appropriate for your kind of job, the metal press brakes can serve you better and longer. You can use your manufacturer’s online calculator to determine the actual tonnage for your preferred metal brake. To help you determine the tonnage better, consider the thickness of the metal press brake, and the length of the brake.
The Dimensions of The Working Area
These dimensions include daylight and stroke, and the throat. Daylight refers to the opening at the front of the metal press brake. Some version of daylight contains holders for tools that allow for easy bending of boxes without the use of high punches. Models with an extended stroke make easier the extraction of the completed pieces. The throat, on the other hand, is an aperture that is usually C-shaped that varies depending on the metal press brake’s dimensions. The role of the throat is to remove pieces of material from side frames of the machine.
Adapters & Tool Clamping
You can use various systems for clamping to arrange and rearrange the tools in your sheet metal brake. The higher your fragmentation lot, the quicker you can do that setup. All you need to is finding an appropriate adapter to insert in the space between punches and the ram. That will allow for the making of deeper boxes without requiring long punches that are usually fragile and very expensive.
Choosing your sheet metal brakes right will require you consider all the above four factors. And, insist that your metal press equipment is of high-quality materials. Compliance is a critical element here, but also, you want value for money. So, only equipment with an extended service life will be best for you.
Read more at Icon Moto Sports.